Description
A Top Quality Heater matrix made in the UK to fit the Toyota Rav4
Heater matrix blocked and giving out no heat?
Then you need to read this before you buy a new one.
The original heater for your vehicle was made from aluminium with very narrow water tubes, as you can see in the listing picture above. Â Original equipment and cheap, poor quality imported replacements all use this design which blocks up very quickly, easily leaving you with no heat.
Our tried and tested copper and brass design has wider water tubes which allow any small particles to flow freely and not block the heater.
Fitting a replacement heater matrix is a very costly labour-intensive job so it makes sense to fit one that won’t block up again.
There will always be someone who says that they can ”do it cheaper” – but at what cost?
Buy cheap – Buy twice!
This replaces the aluminium version with the removable pipes. This is for the later 1st generation models but there is a large overlap with the early models. You may need to check the pipes coming through the bulkhead to see if they are aluminium for this heater, if they are brass you will need the MRH0830 which is also available. The original pipework can be easily fitted to the new unit and new seals are provided. You can click on the image to enlarge it or move your cursor over a specific area to look more closely at a particular feature on the heater core. The dimensions given below are at the longest, widest and deepest points of the heater and not the centre core measurements. If you are not sure whether this is the heater you require please contact us and we will help.
If the stock shows zero we may still be able to help so please contact us
We specialise in manufacturing heaters to a sample so if you can’t find the heater matrix for your vehicle please contact us
This replaces the aluminium version with the removable pipes. This is for the later 1st generation models but there is a large overlap with the early models. You may need to check the pipes coming through the bulkhead to see if they are aluminium, if they are brass you will need the 20830.
Only logged in customers who have purchased this product may leave a review.