Skip to content

Volkswagen Golf 7 Heater matrix 2012 onwards Denso replacement

SKU MRH1084 (12) Category Tag

£97.99 (£81.66 + VAT)

This product can be delivered next working day and has a full manufacturers warranty. If this heater is ‘Sold Out’ please contact us and we will manufacture one to order. Full details of delivery, warranty and the returns policy can be found in the links at the bottom of the page.

Brand: Generic Aftermarket

2 in stock


A Top Quality Heater matrix to fit the VW Volkswagen Golf Mk7 2012 onwards

Heater matrix blocked and giving out no heat? 

Then you need to read this before you buy a new one. 

The original heater for your vehicle was made from aluminium with very narrow water tubes, as you can see in the listing picture above.  Original equipment and cheap, poor quality imported replacements all use this design which blocks up very quickly, easily leaving you with no heat. 

Our tried and tested copper and brass design has wider water tubes which allow any small particles to flow freely and not block the heater. 

Fitting a replacement heater matrix is a very costly labour-intensive job so it makes sense to fit one that won’t block up again. 

There will always be someone who says that they can ”do it cheaper” – but at what cost? 

Buy cheap – Buy twice! 

 This heater only replaces the original Denso unit and will not fit vehicles that use the Valeo heater and heater box. This is a copper and brass version of an aluminium original heater matrix made to the highest standards in the UK. The original pipes are re-used and fitted to the new unit using a set of clamps and seals which are supplied. You can click on the image to enlarge it or move your cursor over a specific area to look more closely at a particular feature on the heater core. The dimensions given below are overall dimensions and not the centre core measurements. If you are not sure whether this is the heater you require please contact us and we will help.

If the stock shows zero we may still be able to help so please contact us

We specialise in manufacturing heaters to a sample so if you can’t find the heater matrix for your vehicle please contact us

Product Type: Heater Matrix
Manufacturer: Volkswagen
Model: Golf Mk7 (5G BA BE1 BQ1 BE2 BV5)
Engine Size: 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0
Year: 2013 onwards
Air Con: +/-
Transmission: Manual & Automatic
Engine Code: all
OE Reference: 5Q0819031 (Denso unit – see description)
Dimensions: 190 x 190 x 32 mm
Other: re-use original pipes, clamps and seals supplied

Additional information

Weight 0.66 kg
Dimensions 12 × 32 × 24 cm

1 review for Volkswagen Golf 7 Heater matrix 2012 onwards Denso replacement

5 Star
1 review(s)
4 Star
0 review(s)
3 Star
0 review(s)
2 Star
0 review(s)
1 Star
0 review(s)

Reviewed by 01 customer(s)

Sort by

  • Avatar

    Simon Marshall

    Dreaded Golf MK7 hot one side cold the other heaters

    Ordered and arrived next day, absolute easy diy job, 2 hours in total, but allow 4 for a novice or first time taking the glovebox apart, looking for hidden screws, only issue I came across was the replacement pipe clamps were very soft and bent when tightening so I had to reuse the original VW ones. Long story short heaters hotter than they’ve ever been now and equal both sides.

    December 22, 2023
    Verified Review

Only logged in customers who have purchased this product may leave a review.

Find your
Heater Matrix

Search from our range of heater matrixes for cars, commercial vehicles and plant machinery.

Did you know we sell our products all over the world?

We welcome heater matrix enquiries from overseas and sell our products all over the world. Visit our delivery page for more information and to arrange a delivery outside the UK.

This website uses cookies to ensure you get the best experience on our website.